Makita BMR103 Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
The following tables indicate the operating time on a single charge in Radio mode/iPod iPhone mode.
7.2 V
9.6 V
BL7010
PA09
9050
9100
9120
9100A
9102
9122
9102A
BH9020
BH9020A
9134
9135
BH9033
BH9033A
Note: Table regarding to the battery operating time above is for reference. The actual operating time may differ with the
type of the battery and the model of iPod/iPhone in use.
: Cluster Battery
: Slide Battery
WARNING:
Do not use two main batteries at the same time.
3-1. Installing or removing Slide battery cartridge (Fig. 4)
• To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click.
• If you can see the red indicator on the upper side of the
button, it is not locked completely. Install it fully until the
red indicator cannot be seen. If not, it may accidentally
fall out of the tool, causing injury to you or someone
around you.
• Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
• To remove the battery cartridge, withdraw it from the
tool while sliding the button on the front of the cartridge
or pressing the buttons on both sides of the cartridge.
WARNING:
Do not use two main batteries at the same time.
Battery Cartridge Voltage
10.8 V
12 V
PA12
1250
1200
BL1013
1220
1200A
1202
1222
1202A
BH1220
BH1200C
1234
1235
1235F
BH1233
BH1233C
14.4 V
18 V
PA14
PA18
1450
1850
1420
BL1815
BL1415
1422
1822
BH1420
1434
1834
BH1427
1435
1835
1435F
BL1830
BL1430
BH1433
3-2. Installing or removing Cluster battery cartridge
(Fig. 5 - 9)
• Pull the supporting bar to allow the battery to insert to
the terminal.
• To insert the battery cartridge, align the tongue on the
battery cartridge with the grove in the housing and slip
it into place.
• Release the supporting bar.
• To remove the battery cartridge, pull the supporting bar
and take the battery out of the terminal.
4. Return the battery compartment locker to the original
position.
5. Reduced power, distortion and a "stuttering sound" or
low battery sign
all the signs that the main battery pack needs to
replace.
Note:
The battery pack can't be charged via the supplied AC
power adaptor.
6. When low battery sign
on flashing is the time to replace the back up batteries.
AT SPEAKER OUTPUT =
50 mW + 50 mW
unit: Hour
In Radio or
In iPod
AUX
mode
APPROX.
APPROX.
5.5
4.0
APPROX.
APPROX.
7.0
6.0
APPROX.
APPROX.
11.0
10.0
APPROX.
APPROX.
14.0
13.0
APPROX.
APPROX.
15.0
13.5
APPROX.
APPROX.
16.5
15.0
APPROX.
APPROX.
18.0
16.5
that appears on the display are
appears and an "E" keeps
In iPhone
mode
APPROX.
2.0
APPROX.
3.0
APPROX.
6.0
APPROX.
9.0
APPROX.
10.0
APPROX.
11.0
APPROX.
12.0
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bmr103b

Tabla de contenido