Publicidad
Dear customer!
Thank you for choosing a product by Kinderkraft.
Our designs are child-oriented – safety and quality always comes first, stay comfortable
knowing that you have made the best choice.
IMPORTANT - Keep these instructions for future reference.
SAFETY INSTRUCTIONS AND PRECAUTIONS
WARNING!
Never leave your child unattended.
Do not use the product when the child can sit unaided or
weighs more than 9 kg.
This product does not replace a baby crib or bed. If your
child needs to sleep, it should be placed in a suitable crib or bed.
The product is not designed for a long period of sleep.
Never use the product on elevated surfaces (e.g. on a table). This may cause
danger.
Always use the fastening system (safety harness).
To avoid injury when folding and unfolding the product, make sure that children
are not in the vicinity.
Do not allow children to play with the product.
Do not move or lift the product with the baby inside.
Never use the baby toy bar as a handle to carry the product.
Keep the product away from open fire and other heat sources such as electric
heaters, gas heaters, etc.
Do not turn the rocking function after locking the device (Fig. XV).
Do not use the product if any parts are damaged or missing.
Do not use any accessories or spare parts other than those recommended by the
manufacturer.
The adapter used with the product should be regularly checked for damage to the cord,
plug, housing and other parts. In case of damage to the parts, stop using the adapter.
The product should only be used with an adapter recommended by the manufacturer.
The power supply adapter cord are not toys and should not be available for children to
play.
Do not connect the adapter if the batteries are inserted in the device.
Safe battery use
EN
13
Disposable batteries are not suitable for charging. Do not mix different types of
batteries, or new batteries with used ones. Insert the batteries according to their proper
polarity. Dead batteries must be removed from the product. Do not short-circuit power
poles. The batteries can be charged only under adult supervision. The batteries must be
charged outside the device.
Technical specifications:
Battery-powered: 4 batteries x C (R14) 1.5 V
Power supply via USB cable (included), requires USB-A slot plate adapter with output
parameters: 5V, minimum current 1A.
Assembly of the product:
Follow Figures II – XIII. Additionally, you may attach a mosquito net around the textile
upholstery (1).
Installing or replacing batteries (Fig. XII, XIII):
In order to install or replace the batteries, use a Phillips screwdriver to remove the
securing flap of the battery compartment. Insert the batteries, observing correct
polarity. Screw the flap back into its place.
Swing control (Fig. XIV):
After installing the batteries or connecting the power supply using the wire provided,
press A button to start the mechanism. To start the rocking function, press "B" button.
Press several times more to change the rocking intensity, which is signalled by LEDs 1, 2
and 3. Holding down "B" button will stop the rocking function. To start the music
function, press "C" button. To change the melody, press "D" button (8 options). To
change the volume, use "F" and "E" buttons. To turn off the sound, press "C" again. To
start the time switch, press "G". By pressing this button you may change the timer
setting (10 min., 20 min., 30 min.) or switch off the function.
Adjusting:
Product settings: bouncer - securing pin locked down (fig. XV). Swing/ rocker – securing
pin unlocked (free rocking possible).
The inclination of the backrest may be adjusted by pressing the side buttons (Fig. IX).
The position of toy bar may be adjusted by the slider (Fig. XI).
Maintenance and cleaning
EN
(not included)
14
Publicidad
