www.trapp.com.br
Warning!
Never hold your hedge trimmer by the cutting
blades.
What does the HT-700 Hedge Trimmer do?
The HT-700 hedge trimmer is recommended
for pruning vegetation in general, such as
hedges and shrubs.
Vegetation pruning can be performed for
maintenance or landscaping. The HT-700
provides quality, practical work, making your
garden more beautiful and healthy.
For good results in shrub or hedge pruning,
it is essential that the blades are specific for
that application. The design and high quality
of the materials used in the HT-700, as well as
the high-performance engine ensure optimum
performance, pruning bushes up to 18 mm in
diameter.
18 mm
The HT-700 hedge trimmer is provided with
double electric insulation to offer greater safety
to the operator. The double insulation is obtained
by two layers of electric insulation material in all
components that carry electric power.
Despite that double insulation, the safety precautions
described in this manual shall be followed. Electric
equipment built with this insulation system do not
require a ground wire.
Image merely illustrative.
Double Insulation
Warning!
In order not to damage your hedge trimmer,
check the place where it will be used and
remove any objects such as nails, wire etc.
before using the equipment.
The material resulting from pruning should
be removed after the prune, so as not to
impair the incidence of sunlight. This results
in healthy growth of vegetation and prevents
the spread of diseases and pests that hinder
growth.
Every plant has an indicated period for
pruning. Before pruning, seek guidance so
that it is according to the species that will be
pruned.
Warning!
Whenever cleaning or maintaining, make sure
the equipment is switched off and unplugged.
Warning:
The double insulation does not substitute the
precautions to be taken when using the hedge
trimmer. It is an additional safety feature against
accidents that may be caused by a failure of the
equipment insulation system.
Image merely illustrative.
23