Monacor TVCCD-400 Manual De Instrucciones página 9

Please unfold page 3. Then you can
always see the operating elements and
connections described.
1 Operating
Connections
1 Video output, 1 Vpp at 75 Ω
2 Power LED
3 Power supply connection 12 V
centre pin = positive pole
necessary plug 5.5/2.1 mm
4 Setscrew for the CS mount ring
5 CS mount ring
6 C mount adaptor ring
Elements and
,
2 Safety Notes
•
This appliance corresponds to the
directive for electromagnetic compati-
biltiy 89/336/EEC.
•
Protect the camera against impurities,
humidity, and heat (permissible operating
temperature range -10°C up to 50°C).
•
The CCD image sensor chip must be
protected against dust or other impuri-
ties and must not be touched with the
fingers in any case.
•
For the cleaning only use a dry cloth, by
no means chemicals or water.
•
If the camera is used for purposes other
than originally intended, if it is connect-
ed in the wrong way or not repaired by
GB
9