Tennant 9002756 Manual Del Operador página 6

Please take note of the information printed on
each genuine paper filter bag - it will assist you
when changing the bag.
Firstly, hold the rubber cuff of the suction pipe
coupling, rotate this anti-clockwise and remove
the coupling from the tank connector.
Hold onto the tab of the filter bag trap door and
gently pull upwards. This will automatically close
the trap door (preventing any dust from escaping)
and the bag will slide upwards and out of the
tank.
The new paper filter bag may now be installed.
Simply locate the cardboard edges of the paper
bag mounting plate into the locating grooves in
the tank and slide the bag down into position.
Home
6
Find... Go To..
The suction hose coupling may now be reinserted into
the tank socket - hold the rubber cuff, insert the coupling
and lock into position by rotating clockwise
The micro filter is secured in position below the
motor by means of a simple press fitting. Two
recesses, in the mounting column, above the
cartridge filter, on the left and right sides, allow
you to insert the middle fingers of both the left
and right hands and gently pull upwards on the
underside of the cartridge filter. To replace the
new or cleaned cartridge simply push it gently
downwards onto the mounting column.
The exhaust filter is designed to primarily filter the
carbon dust from the carbon brushes of the motor.