Qlima D 225 Instrucciones De Uso página 50

REQUIRED DISTANCE
Respect the required distance of the device to walls and other objects.
CONTROL PANEL
1. POWER (On/Off): The unit can be switched on or off. After boot, the current humidity
humidity will be displayed with the defaults of continuous mode "CO", and the
compressor will then start immediately for dehumidification with POWER indicator
lamp lit (when the compressor stops,it flashes).
2. SPEED: Fan speed can be switched between high or low.
Note: In comfortable mode ("AU") when the room temperature is more than 27
degree, the wind speed is fixed.
3. UP-DOWN (HUM+ HUM-) Set the required humidity among the follows: "CO"
(continuous), "30%", "50%", "35%", "40%", "45%", "50%"...... "85%", "90%",
"AU" (comfort), "CO" (continuous) cycle. The default mode is "CO".
Note: Press UP and DOWN at the same time to convert display of temperature or
humidity, the indicator "Cº" being for temperature and "%" for humidity.
4. TIMER: Timing setting.
A. In the power-on state, press the TIMER key to set the timer for the scheduled
shutdown. In the off state, press the TIMER key to set the timer and when to start
the dehumidifier.
B. Regular time range: 01~24 hours, timing setting: 000102......232400 cycle.
C. When the timing is set to power on, the timing setting is completed and the timing
is displayed. When the timing is set to off, the timing setting is completed and the
humidity is displayed after 5 seconds.
5. MODE key: mode conversion: dry clothes, fan, dehumidification.
6. Child lock: Long key This key is 5 seconds for child lock switch selection.
After child lock is turned on, all button operations except child lock buttons cannot
be operated.
7. Dual 8-screen display on synchronous main operation display panel.Note: After the
operation is completed 10S, all lights (including double 8) are all dimmed.
OPERATION
1. Humidity automatic control operation function:
A. When "CO" (continuous) operation is set to dehumidify, the dehumidifier will
continue to operate regardless of the humidity level.
B. If the indoor humidity is higher than or equal to 3% or more of the set humidity,
the compressor and fan will run. The indicator light of the compressor will be on.
4
50
4. 2.
7.
3. 5.
6.
1.