Mondolfo Ferro TBE156 PRO Serie Manual De Uso página 54

The lower shoulder of the rim must always
be facing outward to aid removal of the
tyre (Fig. 9-10).
54
REMOVING AND FITTING TU-
BELESS TYRES
After clamping the wheel on the turntable
using the controls (4 Fig. 4), raise the wheel
using the controls (3 Fig. 4) until the bead
breaker disk on the arm just touches the
edge of the rim (Fig. 11).
9
Break the bead of the deflated tyre, mo-
ving the turntable from right to left in short
intervals, while it rotates continuously
(in a clockwise direction). Continue this
operation, moving around the edge of the
rim with the disk, until bead breaking is
complete (Fig. 12).
10
Lubricate the bead of the tyre and the
edge of the rim with the special grease
and repeat the bead breaking procedure
TBE 156 PRO N - DE LUXE - SUPER
11
12