Mondolfo Ferro TBE156 PRO Serie Manual De Uso página 55

from the inside of the wheel, moving the
turntable in the opposite direction to the
previous operation (Fig. 13).
Continue the bead breaking operation,
moving the disk around the edge of the
rim, until the tyre has been completely
removed (Fig. 14).
To fit the tyre, fix the clamp on the edge of
the rim in the high position, place the two
beads on it and operate the disk against
the tyre (after lubricating the beads and
the edge of the rim) (Fig. 15-16).
TBE 156 PRO N - DE LUXE - SUPER
13
To remove the first edge of the tyre with the
tool, move it forward, inserting it between
the bead and the rim so that it takes hold
of the bead and stretches it, then place the
lever under the tool (7 Fig. 1), bring the
bead outside the edge of the rim and use
the control (3 Fig. 4) to rotate the turntable
anti-clockwise (Fig. 17-18).
14
15
16
17
55