Tyre Inflating; Recommended Fire-Extinguishing Devices - Mondolfo Ferro TBE156 PRO Serie Manual De Uso

TYRE INFLATING

2. Never attempt to mount tyres and
rims that do not correspond. It is very
dangerous. Tyres and rims that do not
correspond could explode, causing
accidents.
3. Only the bead insertion operation is
permitted on the tyre changer, without
exceeding a pressure of 0.5 bar.
4. To inflate the tyre, remove it from
the tyre changer and place it in the
inflation cage
5. Do not use inflation devices (e.g.
pistols) connected to the tyre changer
using external power supply to the
machine.
6. Never bring your head or other body
parts close to a tyre during bead
insertion. This machine is not a safety
device against the possible explosion
risk of tyres, air chambers or rims.
7. Maintain a suitable distance from the
tyre changer during bead insertion,
do not approach it.
DANGER:
A bursting tyre can cause projec-
tions of its parts in surrounding ar-
eas with a force sufficient to cause
serious injury or death.
Do not mount a tyre if its dimensions
(indicated on the side) do not
correspond exactly with the rim
dimensions (printed inside the rim)
or if the rim or the tyre are defective
or damaged.
The tyre changer is not a safety
device and does not prevent tyres
and rims from exploding.
Keep other people at a distance
58
15 RECOMMENDED
FIRE-EXTINGUISHING
DEVICES
When choosing the most suitable fire
extinguisher consult the following table:
Dry combustibles
Water YES
Fuam YES
Dry chemical YES*
CO YES*
2
Inflammable liquids
Water NO
YES
Fuam
Dry chemical YES
CO YES
2
Electrical fires
Water NO
Fuam NO
Dry chemical YES
CO YES
2
YES* Use only if more appropriate
extinguishers are not on hand and when
the fire is small.
TBE 156 PRO N - DE LUXE - SUPER
27