Maintenance; Battery Replacement; To Order - Chauvin Arnoux C.A 861 Manual De Instrucciones

6. MAINTENANCE

For maintenance, use only specified spare parts. The
!
manufacturer will not be held responsible for any accident
occuring following a repair done other than by its After Sales
Service or approved repairers.
6.1 Maintenance
6.1.1

Battery replacement

Select the OFF position on the switch
I
Take off the lid on the back of the instrument
I
Replace the worn-out battery with a 9 V battery (type 6LR61
I
or 6LF22)
6.2 Cleaning the casing
Clean using a cloth lightly dampened in soapy water. Rinse off
with a damp cloth.
! Do not use solvent.
6.3 Metrological verification
Like all measuring or testing devices, the instrument must
!
be checked regularly.
This instrument should be checked at least once a year. For
checking and calibration, contact one of our accredited
metrology laboratories (information and contact details available
on request), at our Chauvin Arnoux subsidiary or the branch in
your country.
6.4 Maintenance
For all repairs before or after expiry of warranty, please return
the device to your distributor.

7. TO ORDER

C.A 861 ............................................................... P01650101Z
C.A 863 ............................................................... P01650201Z
Comes with shock-proof surround, a 9 V battery, a sensor
(C.A 861) or two sensors (C.A 863) and this user's manual.
Spares:
9 V battery .............................................................. P01100620
Accessories :
Refer to §. 5 Sensors
15