Operation; Before Initial Use - Dometic WAECO CF35 Instrucciones De Uso

CoolFreeze
6

Operation

6.1

Before initial use

NOTE
I
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (please
also refer to the "Cleaning and maintenance" on page 38).
Mounting the handles
The handles are enclosed unassembled. If you wish to attach the
handles, proceed as follows:
➤ Make a handle by putting two holders (fig. 5 1, page 4) and a
handle (fig. 5 2, page 4) together.
➤ Fasten the grip with the enclosed screws in the holes provided.
Turning the lid stop around
CF50, CF60
You can turn the lid stop around if you want to open the lid from the
other side. To do this, proceed as follows:
➤ Open the lid and pull it out (fig. 6 A, page 5).
➤ Turn the lid.
➤ Insert the lid in the lid holders on the side opposite the cooler
(fig. 6 B, page 5).
Selecting the temperature units
You can switch the temperature display between Celsius and Fahr-
enheit. This is how to do it:
➤ Switch on the cooler.
➤ Press the "SET" button (fig. 3 4, page 3) twice.
➤ Use the "UP +" (fig. 3 6, page 3) and "DOWN -" (fig. 3 7,
page 3) buttons to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a
few seconds. The display flashes several times before it returns
to the current temperature.
EN
Operation
31