Lenco Xemio-1000 Manual Del Usuario página 9

Note: The player may continue using battery power after it's
been turned off. To maintain the battery life and performance,
if the unit hasn't been used for a while, the battery needs to
be recharged. Recharge the battery at least once per month.
1 Charging the Battery:
1.1 You can charge the Player's battery in two ways:
- Connect the player to your computer. Or:
- Use the USB power charger. (not included)
2 To Charge the battery
2.1 Plug the 3.5mm jack plug of the USB cable to the
Player's multi-functional earphone jack;
2.2 The "Status LED (1)" light will be blinking every second;
this means it is charging.
2.3 The "Status LED (1)" will show a steady light when the
battery is fully charged.
2.4 Disconnect the USB cable when it is done.
3 Notes on charging the battery
3.1 The 3.5mm jack plug of the USB cable supplied with
your Player is not water resistant.
3.2 Before charging the battery, make sure your Player is
not wet. If there is moisture on the Player, wipe it off
completely, and leave the Player at room temperature
9