Newton EQ-1 Instrucciones De Uso página 47

Index
1. Assembly of the EQ-1 mount
1.1 Setting up the tripod
1.2 Attaching the mount
1.3 Installing the counterweight
1.4 Attaching the tube rings
1.5 Attaching the slow motions / screws for fine control
1.6 Attaching the telescope tube
1.7 Attaching the finder scope / red dot finder with the mounting bracket
1.8 Attaching the finder scope / red dot finder with the sliding mounting plate
1.9 Inserting the eyepieces with Newtonian telescopes
1.10 Inserting the eyepieces with refracting / lens telescopes
2. Assembly of the EQ-2 mount
2.1 Setting up the tripod
2.2 Attaching the mount
2.3 nstalling the counterweight
2.4 Attaching the tube rings
2.5 Attaching the slow motions / screws for fine control
2.6 Attaching the telescope tube
2.7 Attaching the finder scope / red dot finder with the mounting bracket
2.8 Attaching the finder scope / red dot finder with the sliding mounting plate
2.9 Inserting the eyepieces with Newtonian telescopes
2.10 Inserting the eyepieces with refracting / lens telescopes
3. Operation of the telescope
3.1 Aligning the optical finder scope
3.2 Aligning the red dot finder
3.3 Balancing the telescope
3.4 Operation of the EQ-1 and EQ-2 mount
3.5 EQ-1/EQ-2 mount setting circles
4. Just before observing - the accessories
4.1 Eyepieces
4.2 Adjusting a Newtonian telescope
5. Cleaning and care of your telescope
6. When the stars twinkle particularly beautifully
7. Preparing for an observing session
8. Trouble-shooting
46