Leckey Squiggles Instrucciones De Usuario página 38

Transferring your child into
and out of the seat
Before transferring the child into the seat
carry out the daily product inspection as
outlined in section 13 of this user manual.
Adjust the seat to a comfortable height
to facilitate transfer. Lock all the castors,
ensuring that they are facing outwards
to maximise product stability. Make sure
the safety buckle on the chest harness
is released and is out of the way to
facilitate transfer.
Unclip the pelvic harness in the middle and
allow the harness to open out to facilitate
transfer. Lastly if sandals are fitted open the
straps. You are now ready to transfer or hoist
the child into the seat.
Always secure the pelvic harness
first before fastening other buckles or
harnesses. Adjust the harness so the child
cannot slide or creep forward in the seat.
Adjusting the Pelvic
Harness
The correct positioning and tensioning of the
pelvic harness is key to a child's postural
management affecting their comfort and
ability to achieve functional goals. Please ask
your therapist as to the correct tensioning of
straps for your child as this is critical to good
postural management.
To tension the pelvic straps and pads around
the child pull the centre strap (A). Pull the
two side straps(B) up to fine tune the pelvic
position and adjust the height of the pads on
the hips.
Check the harness regularly to ensure
the child is safe and cannot slide forward
in the seat.
B
A
B