Leckey Squiggles Instrucciones De Usuario página 9

Locating the backrest
The backrest will be folded down for
shipping. Raise it into the vertical position
and, while doing so, slide the inner tube (A)
into the receiving backrest pivot lock (B).
Secure the backrest in an upright position
by tightening the ratchet handle (C). Check
that it is secure and does not move when
pressure is applied.
B
C
A
Attaching the footrest
To attach the footrest to the seat base,
remove the bolt and nut from the metal stem
on the footrest and turn the seat unit upside
down on a level surface. Then slide the metal
tube into the moulding as shown. When the
hole in the metal plate is aligned with the
hole in the moulding, replace the bolt and
secure with the nut provided. Make sure
the end of the bolt protrudes from the end
of the nut.
You can now attach the seat to your chassis
and complete the assembly of the product
and any accessories you have ordered.
Always make sure the foot plate is
attached firmly.