Operating Range Of Remote Control; Remote Control - Pioneer SBX-300 Manual De Instrucciones

6 Before you start
En
Operating range of remote
control
The remote control may not work properly if:
• There are obstacles between the remote control
and the unit's remote sensor.
• Direct sunlight or fluorescent light is shining onto
the remote sensor.
• The unit is located near a device that is emitting
infrared rays.

Remote control

1
2
3
4
5
6
1 STANDBY/ON
Turns the power of the unit on/off (standby
mode).
2 Input Selection Buttons
Switches the input of the unit.
3 Sound setting buttons
SURROUND
Turns on/off the surround function.
NIGHT
Turns on/off the night function.
AUTO LEVEL CONTROL
Turns on/off the auto level control function.
DIALOG
Turns the dialog function on/off.
• The unit is operated simultaneously with another
infrared remote control unit.
• When the IR repeater function (page 16) or
learning function (page 17) is used to operate
TV remote control, the operating range will differ
depending on the performance of the TV remote
control. (The operating range may be reduced.)
4 MUTE
Temporarily mutes the sound. Press again
to restore the original volume.
5 DIMMER
Changes the brightness of the indicators on
the front panel of the unit in three steps.
6 LIP SYNC (AUDIO SYNC)
Adjusts the lip sync function.
7
7 VOLUME
Adjusts the overall volume including the
subwoofer volume.
8 SUBWOOFER VOL
8
Adjusts the subwoofer (bass sound) volume.
9 STATUS
9
Allows you to confirm the status of various
settings.
Remote control
sensor
30° 30°
7 m
Remote control