Tabla de contenido
Publicidad
!
Do not overtighten the valve as this may damage
the thread on the pump.
Then connect the cable from the valve to the suit-
able connector on the controller (see the preced-
ing paragraph "INTERCONNECTIONS").
TV-301 AG Rack Controller Compatible
Vent Valve mod. 969-9844
For further details refers to the Rack Controller
manual.
CAUTION
To install the vent valve unscrew and remove the
threaded plug (see figure below).
Screw the flange mod. 969-9108 on the pump, tak-
ing care of the o-ring right position.
Assemble the seal ring and lock the vent device in
position using the KF klamp.
85/90
TECHNICAL INFORMATION
87-900-946-01(G)
Publicidad
Tabla de contenido
