Water Cooling Kit Installation - Varian TV 301 Navigator Manual De Instrucciones

Bombas turbomoleculares
Tabla de contenido

Publicidad

To fix the fan to the TV 301 case execute the fol-
lowing procedure (see the following figure):
1. Fix the fan to the suitable bracket by means of
the furnished screws;
2. Fix the bracket to the pump body between the
pump and the controller;
3. Connect the fan supply to the P4 connector of
the controller.

WATER COOLING KIT INSTALLATION

Two types of water cooling kits are available to be
mounted when the pump is used under heavy load
conditions or when air cooling is insufficient.
The two model part numbers are: 969-9337 (me-
tallic model), and 969-9347 (plastic model).
The items of the plastic model kit must be assem-
bled as shown in the following figure
The assembled kit must be screwed into the suit-
able holes of the pump body with a recommended
closing torque of 5 Nm.
83/90
TECHNICAL INFORMATION
Model 969-9337
Model 969-9347
!
CAUTION
87-900-946-01(G)

Publicidad

Tabla de contenido
loading

Tabla de contenido