Dometic PerfectWall Serie Instrucciones De Montaje página 13

PerfectWall
Observe the required cable cross section when connecting to the power supply:
Cable length
2 m
4 m
6 m
8 m
Legend to fig. m, page 2:
No. Description
1 Receiver
2 3 A fuse for LED awning light (optional)
3 on Orange line for D+ connection
4 rd Red line for LED awning light (optional)
5 bk Black line for LED awning light (optional)
6 bu Blue line for motor connection
7 bn Brown line for motor connection
8 bk Black line for power supply
9 rd Red line for power supply
10 Main switch
11 15 A fuse for main switch
Installing the wall switch
➤ Find a suitable location inside the motor home, out of direct sunlight, to install the
switch.
Installing the receiver of the remote control and connecting the electrical
connections
➤ Find a suitable location inside the motor home, out of direct sunlight, to install the
mounting bracket for the remote control.
➤ Connect the motor with the remote control in accordance with the applicable
electrical engineering regulations and the circuit diagram (fig. m, page 2).
EN
Connecting the awning (PW1500 and PW1750)
Required cable cross section
1.5 mm²
2.5 mm²
4.0 mm²
6.0 mm²
13