Solter ICON 1750 Manual De Instrucciones página 13

ELECTROMAGNETIC DISTURBANCES
Electromagnetic interferences produced by welding equipment may interfere in the operation of
equipment which is sensitive to this kind of interference (computers, robots etc).
Ensure that all the equipment in the welding area is resistant to electromagnetic radiation.
In order to reduce radiation as much as possible work with welding wires as short as possible,
placed in parallel on the floor if possible.
Work at a distance of 100 metres or more from equipment which is sensitive to disturbances.
Ensure that the machine equipment is correctly earthed.
If there are interference problems despite having taken the above described precautionary
measures, the operator must take extra measures such as moving the welding machine, and the use
of filters or protected cables to ensure that interference with other equipment does not occur.
RAEE
This symbol indicates that at the end of the useful life of the equipment it should be taken to a
recycling centre for electrical and electronic equipment. For more information on the recycling of this
product contact your local recycling centre.
ICON welding equipment with INVERTER SOLTER technology attains strength and flexibility with a compact,
lightweight form.
Universal application is possible to any type of welding materials - as diverse as stainless steel, alloyed steels
or other types of steel, etc.
Body housing design. The DDR (Dual Density Reinforcement) System
The body housing is manufactured with highly resistant materials, and has special ergonomic characteristics
which lend robustness due to the double injection DDR, Dual Density Reinforcement System, patented by
SOLTER.
The double rubber injection is used for three basic functions. First to obtain a pleasant, non-slippery feel to the
handle. The double injection is also used to integrate feet and lateral protections on the base of the equipment,
promoting the stability of the machine on slippery surfaces, and finally, on the non-visible part of the equipment,
it reinforces the support of the electronic circuit protecting it from accidental blows.
Control panel design
The control panel has been designed in order to make the parameter modification intuitive and rapid. You do
not have to remember long sequences in order to modify the equipment parameters - this improves the range
of equipment use.
Total protection
The equipment possesses all the protection systems necessary to guarantee correct operation. Temperature
sensors guarantee that the components are maintained within operational margins.
The supervision of the electrical supply guarantees that the equipment functions within the established margins
and if these are exceeded it will disconnect in order to avoid possible damage.
Ventilation
The equipment possesses an intelligent ventilation system which will only be activated if the equipment is being
used or if the internal temperature is high. This avoids dust gathering on the machine and reduces the
frequency of maintenance periods. Users should still be careful with respect to the production of metallic dust
and particles while using the equipment.
Automatic disconnection
The equipment has a protective automatic disconnection system which switches on after being at rest for 15
minutes, the equipment automatically switches back on when welding is continued.
Model
MMA
Regulation (A)
TIG
Cyclic duration
MMA
factor
TIG
to 20ºC/40ºC (%)
Power input MMA
SOLTER SOLDADURA S.L.
ICON
ICON ICON
1870
1750 1850
CEL
10-150 10-160 10-150
10-150 10-160 10-150
60 / 35 60 / 35 60 / 30
60 / 40 60 / 40 60 / 35
6,0 6,3
ICON ICON
1890 1950
VRD PRO
10-160 10-180
10-160 10-180
60 / 35 80 / 60
60 / 40 80 / 65
6,0 6,3 6,9
ICON ICON
ICON
1970 2060
2050
PRO PRO
PRO
CEL VRD
10-200 10-180 10-200
10-200 10-180 10-200
80 / 60 80 / 60 80 / 60
80 / 65 80 / 65 80 / 65
7,2 6,9 7,2