Working Modes - Solter ICON 1750 Manual De Instrucciones

The equipment automatically memorises the values last used in each working mode. This allows the user to
recover the parameters of a working mode in a simple and rapid manner.
There are 3 possible memories, MMA, MMA VRD and TIG, in which the parameter values are stored.
The type of memory used by the machine is permanent and does not depend on any kind of support battery.
General description
Parameters:
1 - I "Hot start" current.
hot
2 - I Welding current.
1
Units:
3 - A (welding current).
4 - S (time in seconds).
Parameters
I
Welding current I
1
Start current. In MMA and MMA VRD modes. This determines the start current of the arc (Hot
I
Start), improving the ignition of difficult electrodes. In this case the possible values range from a
hot
value of I
1

Working modes

MMA coated welding electrode
MMA VRD coated welding electrode
TIG mode
Double parameters
In the ICON-1890VRD and ICON-2060 PRO VRD models some indicators may have double parameters.
Special attention must be paid to the unit pilot indicator (Fig. 10 to 13).
In MMA mode: The I parameter is twice the ignition current (A) and the current time (S) (Hot Start).
hot
Indication of the Hot-start current I
Unit: Amps
The symbol lights up. Welding for coated electrodes. Adjustment parameters (ICON):
I Hot Start ignition current. Adjustment values between 100% and 150% of the main current.
hot
Only in ICON-1890VRD and ICON-2060 PRO VRD models.
The lights up. Welding for coated electrodes.
The Hot Start parameters are pre-adjusted and cannot be modified. Adjustment parameters:
I Hot Start ignition current. Adjustment values between I
hot
Tiempo de I Application time for Hot Start current.
hot
I Welding current.
1
Only in the ICON-1890VRD and ICON-2060 PRO VRD models. The
Welding with tungsten electrode. Possible adjustment parameters:
SOLTER SOLDADURA S.L.
(Fig. 4)
Modes:
5 - MMA mode.
6 - MMA withVRD mode.
5 - TIG mode.
. Adjustment limit is between 10A and 160A.
1
to 160 A.
hot
Others:
8 -
9 - Selection control button.
10 -Screen.
Warning
Fig. B
Indication of current time T
Unit: Seconds.
1
symbol lights up.
Error indicator.
hot
and 160 A.