Cleaning - RIDGID R8702 Serie Manual Del Operador

OPERATION
WARNING:
Do not allow the power cable to become pinched.
Pinched cables increase the risk of burns.
NOTE: Remove the battery pack from the power source
when the jacket is not in use.
WARNING:
To reduce the risk of injury, user must read and
understand the operator's manual for their USB
accessories in addition to this manual. Ensure
compatibility before attaching a USB device to
the power source. Do not use the power source if
a part is damaged or missing.
ROUTING USB CABLE THROUGH JACKET
See Figure 7, page 8.
When using a power source to charge or power a device
while wearing the heated jacket, a convenient set of open-
ings is provided through which you can route the cables.
 Connect the power source to the jacket power cable as
previously described.

CLEANING

WARNING:
To reduce the risk of personal injury and damage,
always remove the battery pack and power source
before cleaning the heated jacket. Never immerse
the battery pack or power source in liquid or allow
liquid to flow inside them.
CLEANING THE HEATED JACKET
Do not machine wash, even if your machine has a hand wash
(or equivalent) setting. Do not iron.
Do not dry clean. Dry cleaning chemicals can damage the
internal wiring of the jacket.
This product has a 90-Day Satisfaction Guarantee Policy, as well as a
One-year Limited Warranty. For Warranty and Policy details, please go to
NOTE: Figures (illustrations) start on page 6
after French and Spanish language sections.
www.RIDGID.com or call (toll free) 1-866-539-1710.
 Plug the USB cable (not provided) into the USB port on
the power source.
 Place the power source and battery into the battery
pocket on the jacket.
 Route the USB cable through the opening in the battery
pocket to the inside of the jacket.
 Thread the cable through the channel and opening lead-
ing to the pocket where you wish to carry the device being
powered or charged.
 Plug the USB cable into the device you wish to power
or charge and place the device into the chest pocket to
carry.
NOTE: You can route the jacket power cable through the
opening in the back of the battery pocket before connect-
ing to the power source and battery, allowing you to clip
the power source to your belt during use. Never allow the
power source to hang loosely by the cord.
NOTICE:
In order to avoid potential damages due to
overheating, please use the lower pocket to store
devices while they are being charged or powered.
To clean the heated jacket:
 Disconnect the jacket from the power source.
 Remove the battery pack and power source from the
battery pocket, if applicable.
NOTE: Do not allow the battery pack or power source
to come into contact with any liquid while cleaning the
jacket.
 Hand wash the jacket using cold water and a mild liquid
soap.
NOTE: Do not use bleach, powdered detergents, harsh
liquid detergents, or fabric softener.
 Hang to dry.
NOTE: Do not wring to remove water and do not machine
dry.
5 - English