Cooper Hand Tools Weller WD 1 Manual De Uso página 41

The funnel insert (13) for the soldering iron has four different
settings and can be moved to an ergonomically favourable
position without the use of tools. Areas have been provided
on the rear side (14) for depositing the soldering tip.
The pedestal plate of the rest contains a sponge insert (15)
for cleaning the soldering tips.
2.3. Soldering iron
WP 80: The WP 80 soldering iron is characterised by fast
and precise achievement of the soldering tip tem-
perature. A particularly powerful 80 W heating ele-
ment guarantees excellent dynamic behaviour. The
combination of slim design and short distance from
handle to soldering tip means that universal appli-
cation is possible, from extremely fine soldering
tasks to those which require high temperatures.
WMP: The Weller Micro Soldering Iron WMP is suitable for
processing SMD electronics due to its manageable
design. The short distance between grip and solde-
ring tip makes ergonomic handling of the 65 W sol-
dering iron possible when carrying out very fine sol-
dering tasks.
WTA 50: The desoldering tweezers WTA 50 were designed
specially for unsoldering SMD components.
Two heating elements (2 x 25 W), each with its own
temperature sensor, guarantee the same tempera-
ture on both legs.
LR 82: Powerful 80 W soldering iron for soldering tasks
with high heat requirements. The soldering tip is
secured by means of a bayonet catch, which
ensures that tips are always in the correct position
after a change.
Special functions
3 Fixed temperatures
Temperature buttons
WMRP (solo WD 1M):
Extremely powerful 40W fine soldering iron with
integrated heating technology in the soldering tip.
The soldering tip can be changed without the need
of tools thanks to a plug-in system. The soldering
tip temperature is reached extremely quickly and
is controlled precisely. Sensors built in to the
handle ensure that the soldering iron is switched
off automatically when placed down.
WMRT (solo WD 1M):
Very manageable desoldering tweezers for precisi-
on SMD electronic devices. The soldering tip pair
can be changed as required without the use of
tools and can be used without additional
alignment of the soldering tips. The integrated 2 X
40W heating elements ensure that the soldering
tip temperature is reached very quickly and con-
trolled precisely. Sensors built in to the handle
ensure that the desoldering tweezers are switched
off automatically when placed down.
See Accessories for a list of other soldering tools that can be
connected.
English
Temperatur display
Temperatur symbol
Time functions
Interlock
Visual control check
34