Orbegozo PB 2228 Manual De Instrucciones página 9

PB 2228
Picture 2
A.Take out the used battery with the aid of a sharp object, as shown in picture 2.
B.Install new battery by putting one side of the battery beneath the battery baffle and then pressing down the
other side.
Operating Instructions
• STEP I. Put the scales on a hard flat surface (avoiding carpets or any soft surfaces).
• STEP 2. Switch on the scales by with a slight tap on the glass platform near LCD display. Then wait a few
seconds, the following will appear: "0.0" in the screen.
NOTE: The scales will not work properly if you step on the scales before it shows 8 or 0.0 If this happens
please start from the beginning of step 2.
• STEP 3. Gently step on the scales. Put your feet evenly on the scales without moving and wait whilst the
scales compute weight. Your correct weight will then be displayed in the following way:
9