Safety; Important Safety Instructions For Using Staplers - Hitachi N3804AB3 Instrucciones Y Manual De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English

IMPORTANT SAFETY INSTRUCTIONS FOR USING STAPLERS

READ ALL INSTRUCTIONS
1.
OPERATORS AND OTHERS IN WORK AREA MUST
WEAR SAFETY GLASSES WITH SIDE SHIELDS.
When operating the Stapler, always
wear safety glasses with side shields,
and make sure others in work area
wear safety glasses, too.
Safety glasses must conform to the
requirements of American National
Standards Institute, ANSI Z87.1 and
provide protection against flying
particles both from the front and side.
The employer must enforce the use of
safety glasses by the Stapler operator
and others in work area.
3.
NEVER POINT TOOL AT YOURSELF OR OTHERS
IN WORK AREA.
Always assume the Stapler contains
fasteners.
Never point the Stapler at yourself
toward yourself or others, whether it
contains fasteners or not.
If fasteners are mistakenly driven, it
can lead to severe injuries.
Never engage in horseplay with the
Stapler.
Respect the Stapler as a working
implement.
4.
KEEP FINGERS AWAY FROM TRIGGER WHEN
NOT DRIVING FASTENERS TO AVOID
ACCIDENTAL FIRING.
Never carry the Stapler with finger on trigger since
you could drive a fastener unintentionally and
injure yourself or someone else.
Always carry the Stapler by the handle only.
5.
CHOICE OF TRIGGERING METHOD IS
IMPORTANT.
Please read and understand page 13 of "METHODS
OF OPERATION."
6.
DO NOT EXCEED 120 psi. (8.3 bar 8.5 kgf/cm
Do not exceed maximum recommended air
pressure 120 psi (8.3 bar 8.5 kgf/cm
Never connect the Stapler to pressure which
potentially exceeds 200 psi (13.7 bar 14 kgf/cm
as the Stapler can burst.
4

SAFETY

DANGER
2.
NEVER USE OXYGEN OR OTHER BOTTLED
GASES. EXPLOSION MAY OCCUR.
WARNING
7.
ALWAYS WEAR EAR AND HEAD PROTECTION.
Always wear ear protection to protect your ears
from loud noise.
Always wear head protection to protect your head
from flying objects.
8.
STORE STAPLER PROPERLY.
When not in use, the Stapler should be stored in a
dry place. Keep out of reach of children. Lock the
storage area.
9.
KEEP WORK AREA CLEAN.
Cluttered areas invite injuries. Clear all work areas
of unnecessary tools, debris, furniture, etc.
10. NEVER USE IN PRESENCE OF FLAMMABLE
LIQUIDS OR GASES.
The Stapler produces sparks during operation.
2
)
Never use the Stapler in sites containing lacquer,
paint, benzine, thinner, gasoline, gases, adhesive
2
).
agents, and other materials which are combustible
or explosive.
2
)
Never use oxygen, combustible gases
or any other bottled gases as a power
source for the Stapler.
Use of the above gases is dangerous,
as the Stapler will explode.
Use only clean, dry, regulated
compressed air.

Publicidad

Tabla de contenido
loading

Tabla de contenido