Quantum optITURN TQ 3209 Manual De Instrucciones página 137

9 Appendix
9.1 Copyright
This document is protected by copyright. All derived rights are reserved, especially those of
translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar
means and recording in data processing systems, either partial or total.
Subject to technical changes without notice.
9.2 Terminology/Glossary
Term
Headstock
Lead screw nut
Lathe chuck
Drill chuck
Lathe saddle
Cross slide
Top slide
Taper mandrel
Tool
Workpiece
Tailstock
rest
Lathe dog
Threading gauge
Appendix
Version 1.0 dated 2016-4-25
Explanation
Housing for the feed gear and the synchronous belt pulleys.
Split nut which engages the lead screw.
Clamping tool for holding the workpiece.
Drill bit adapter
Slide on the slideway of the machine bed which feeds parallel to
the tool axis.
Slide on the slideway of the machine bed which feeds parallel to
the tool axis.
Swivelling slide on the cross slide.
Taper of the drill bit, the drill chuck or the centering point.
Lathe tool, drill bit, etc.
Piece to be turned or machined.
Movable turning aid.
Follow or steady support for turning long workpieces.
Device or clamping aid for driving pieces to be turned between cen-
tres.
Help with thread cutting
Original operating instructions
quantum
M A S C H I N E N - G E R M A N Y
TQ3209 | TQ3209D
®
GB
Page 115