Beurer BM 77 Manual De Instrucciones página 38

A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (morn-
ing: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening measure-
ments for the last 7 days is displayed (even-
ing: 6.00 p.m. – 08.00 p.m.).
• When the relevant memory button (M1 or
M2) is pressed again, the last individual
measurement is displayed (in this example,
measurement 03).
• When the relevant memory button (M1 or M2) is
pressed again, you can view your individual measure-
ments.
• To switch the device off again, press the Start/stop
button or wait 30 sec.
You can exit the menu at any time by pressing the
Start/stop button
• To delete all measurements saved for a particular user,
first select the user as described by pressing memory
button M1/M2.
• A flashes on the display and the average value of all
saved measured values in this user memory is dis-
played.
• Depending on which user memory was selected, press
and hold memory button M1 or M2 for approx. 5 se-
conds.
• CL 00 appears on the display. All the values
in the current user memory are deleted.
38
.