Care And Maintenance; Cleaning The Cuff; Troubleshooting Guide - Beurer EM34 Manual De Instrucciones

7. Care and Maintenance

CAUTION
• Before cleaning, disconnect the power wire from the
device and from the cuff.

Cleaning the Cuff

Clean the cuff in warm soapy water and then rinse well,
making sure all soap is washed out. Pat cuff dry with a towel
and then let air dry completely before use.
Storage
To store the device, first ensure it is switched off. Discon-
nect the power wire from the control unit and from the cuff.
Place all parts back into their original packaging and store
in a cool, dry place out of the reach of children.

8. Troubleshooting Guide

Problem Possible cause
The device Batteries are
does not depleted
switch on
Batteries are not
inserted correctly
The elec- Cuff is not con-
trical pulses tacting skin prop-
are weak erly
Electrodes are not
wet enough
10
Solution
Replace the bat-
teries
Reinsert the bat-
teries according to
the polarity indica-
tors inside the bat-
tery compartment
Reposition the cuff
to ensure it con-
tacts the skin suf-
ficiently
Shut off the de-
vice and remoisten
electrodes