terminals, internal components that are not covered by the warranty.
There are no components of the radio that can be repaired by the user. For
repairs, contact an authorized service center.
To prevent the risk of fire, use a suitable power supply.
Key features
•
All control keys are on placed the microphone
•
Multicolor screen (7 colors)
•
Manual squelch (28 levels)
•
Automatic Digital Squelch (5 levels)
•
RF Gain
•
Channel scan function
•
S-meter RX-TX on the screen
•
Lighter plug included
•
2-pin Kenwood connector for audio accessories
Installation instructions
Before installing the radio in your car, choose the most suitable location so
that when using it, it does not disturb you while driving.
To install the radio, use the bracket and accessories in the package. The
screws must be tightened well to avoid vibration of the radio while driving.
The mounting bracket can be positioned above or below the radio, and it can
be tilted depending on the installation method.
WARNING: Make sure that the voltage at which you supply the radio is the one
indicated by the manufacturer (12V).
Power the radio
The power cord of the radio includes a protective fuse (on the red wire). The
radio is equipped with a cigarette lighter plug. To power the radio, insert the
cigarette lighter plug into the dedicated slot in your car.
WARNING: If the fuse burns, do not replace it with a higher value one. The one
User manual
4