DSC WTK5504 Serie Instrucciones De Instalación página 6

NOTES
SIA Features
The following SIA features can only be programmed at the panel
(PC9155(D)(G)(I)-433, SCW9055/57(D)(G)(I)-433, or PC1864/PC1832/
PC1616 using keypad model PK5500):
• Exit Time 4.2.2.1
• Abort Window 4.2.5.1
• Disarm 4.2.5.1.1
• Abort Window 4.2.5.1.2
• Cancel Window 4.2.4.5 and 4.2.5.4.1
UL/ULC
The equipment covered by this manual is intended for installation and opera-
tion in accordance with the following applicable national and UL/ULC Stan-
dards as well as the local authority having jurisdiction:
A. NFPA 70, "National Electrical Code."
B. NFPA 72, "National Fire Alarm Code."
C. NFPA 720, entitled "Standard for the Installation of Carbon Monoxide
(CO) Detection and Warning Equipment."
D. UL 1641, "Installation and Classification of Residential Burglar Alarm
Systems."
E. UL 681, "Installation and Classification of Mercantile and Bank Burglar
Alarm Systems."
F. National Building Code (NBC);
G. CSA C22.1 - Canadian Electrical Code, Part 1;
H. CAN/ULC S561-03 - Standard for the Installation and Services for Fire
Signal Receiving Centre and Systems;
CAN/ULC-S302-M88 - Standard for Installation and Classification of Bur-
I.
glar Alarm Systems for Financial and Commercial Premises, Safes and
Vaults;
J. CAN/ULC-S540-M86 - Standard for the Installation of Residential Fire
Warning Systems;
K. CAN/ULC-S310-M91 - Standard for the Installation and Classification of
Residential Burglary Alarm Systems.
L. Local Authorities Having Jurisdiction (AHJ).
M. Manufacturer's Installation Instructions.
This product contains open source components QT Version 4.7.3 and Linux
Kernel License: Version 2.6. These components are protected by copyright
and have terms and conditions associated with their use. The open source
software code and associated components used in this product are download-
able from the DSC website. Please visit http://www.dsc.com/open-source-
documentation for detailed information.