Program Playback - OK. ORC 330-B Manual De Instrucciones

EN

PROGRAM PLAYBACK

Notes:
• Up to 20 CD tracks or up to 99 MP3 tracks can be programmed for a playback in any desired order.
• Programmed playback can only be made from one single source - it cannot include tracks from CD
disc and USB storage at the same time.
1. Stop playback: Press
18
2. Enter program settings: Press AMS/MODE . PROG and P01 will show on the display.
3. Select desired track: Press
4. Store selected track into the program memory: Press AMS/MODE again. P02 will now show
on the display.
5. Repeat step 3 and 4 to program additional tracks.
6. After programming all the desired tracks, press
on the display.
7. Stop playback: Press 1x
8. Cancel program playback: Press 2x
AUXILIARY (AUX) PLAYBACK
Warning!
Observe the relevant safety information for use with other devices when connecting an external device.
19 button to turn on the product. Press FUNC. until "AU" appears on the display.
Press
Connect auxiliary device to the AUX-IN socket using 3.5 mm jack audio cable (not included).
20
If an auxiliary device is connected, all playback functions of this device need to be used.
IM_ORC330B_180530_(A)_V03_HR.indb 16
16
.
or .
.
. PROG disappears from the display.
to start program playback. PROG appears
30/5/18 2:06 pm