Connecting Serial Attached Scsi (Sas) Cables - Dell PowerVault ML6000 Guía De Inicio

1 LCB middle Ethernet ports
3 Target ports
5 Fibre Channel port
7 "UPPER" and "LOWER" ports

Connecting Serial Attached SCSI (SAS) Cables

Perform this step if your library contains serial attached SCSI (SAS) tape drives.
Use SAS cables to connect the SAS tape drives directly to the host. For each tape
drive:
1 Connect one end of the SAS cable to the SAS port on the tape drive.
2 Connect the other end of the SAS cable directly to the host.
16
Dell PowerVault ML6000 Getting Started Guide
2 Fibre Channel I/O blade
4 Initiator ports
6 Ethernet cables