Using Your Appliance - Krups PERFECT MIX 9000 MiniPro Manual De Uso

Ocultar thumbs Ver también para PERFECT MIX 9000 MiniPro:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
KR_MINI-BLENDER_PERFECT-MIX_8080012620_MISEENPAGE07/05/1315:50Page13

USING YOUR APPLIANCE

1 - M I XI NG / B LE N D I NG / S MOOTH I NG (mixer bowl D)
Do not operate the blender bowl without ingredients, with dry or hard products only (such as sugar
cubes) or if the lid (D6) with its seal (D5) is not fitted to the bowl (D).
Depending on the type of ingredients, the mixer bowl (D) allows you to prepare up to 0.6L of a thick mixture
or 0.5L of a liquid preparation, such as:
Ingredients
Apple juice: apples + water
Vegetable soup: cooked vegetables + water 300g cooked vegetables 200ml water
Fruit smoothie: soft fruit + milk
Do not put any liquid or ingredients whose temperature exceeds 60° C (140°F) in the mixer
bowl. The blender bowl (D) must not be put into a fridge or freezer.
Always pour liquid ingredients into the blender bowl first before adding the solid ingredients, without
exceeding the maximum level indicated. Solid ingredients should be cut into 20 mm x 20 mm pieces.
You can prepare:
- Smooth soups, creamy sauces, smoothies, milk-shakes and cocktails.
- Light batters (pancakes, doughnuts, clafoutis, far, etc.).
FITTING THE ACCESSORIES
Make sure that the seal is fitted and correctly positioned on the blade unit (D1): the folds of
the seal should be visible when it is in place and the seal should be flat, it should not be
buckled (fig1).
Press the "click" button (D2) on the blade unit (D1) facing you. Position the base of the bowl (D4) under
the ridge (D3) (fig. 2a) then move the blade unit (D1) towards the bowl (fig. 2b) until it clicks. Press on
the top of the click button (D2) to ensure that the bowl (D4) and the blade unit (D1) are fitted together
correctly (fig 2c).
Fit the lid seal (D5) around the lid (D6) place the lid assembly on the bowl (D4), lock the cap (D7) in its
housing located on the lid. Fit the assembled bowl (D) to the motor unit (A) with the click button (D2) of
the blade unit lined up with the notch located in front of the motor unit (A)(fig. 3).
Note: If the bowl (D) is not far enough down on the motor unit (A) the appliance will not work (fig. 4).
Plug in the appliance and press button 1 (C) or 2(B), depending on the required speed, pressing several
times or holding the button down for continuous operation. Do not use for more than 60 seconds in
continuous operation.
To stop the appliance, release the pressure on button (B) or (C). Unplug the appliance. Remove the bowl
(D) from the motor unit (A).
2 - CHOPPI NG (mini chopper E) or G R I N D I NG (coffee grinder F)
The lid (G) is fitted on the bowl (E4) or (F4) to avoid preparations drying out and allows them
to be kept in the refrigerator for later use. The lid (G or H), the bowl (E4) or (F4) should not be put in the
freezer.
Quantities
300g apples 200ml water
300g soft fruit 200ml milk
English
Operating times
20 seconds button 2
20 seconds button 2
15 seconds button 2
13

Publicidad

Tabla de contenido
loading

Tabla de contenido