Walgreens WGNBPA-240BT Manual Del Usuario E Instrucciones De Programación página 28

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE:
• The measurement is stored in the monitor's memory even if the
reading is not transmitted to your mobile device.
• The BP Health App must be open on your mobile device in order to
transmit your measurements.
• Only new readings will be accepted by the app.
• The blood pressure monitor can only be assigned to one Walgreens
user account.
• To ensure readings transmitted to the app have the correct date and
time, it is important that the correct date and time is set on the blood
pressure monitor before taking measurements.
• Measurements transmitted to the app cannot be edited.
• This monitor is subject to and complies with electromagnetic
compatibility (EMC) standard of IEC 60601-1-2, EN 301 489-1, EN
301 489-17, EN 300 328 and U.S. federal guidelines, Part 15 of the
FCC (Federal Communications Commission) rules for devices with
RF capability. These guidelines help ensure that your monitor will not
affect the operation of other nearby devices. Additionally, other devices
should not affect the use of your monitor.
• Other wireless devices that are in use nearby, such as a cell or mobile
phone, or a wireless network, may prevent or delay the transmission of
data from your monitor to paired Bluetooth
away from the source of the interference or turning off these devices
may resolve the problem.
• Make sure the monitor and paired Bluetooth-enabled device are within
an acceptable distance (no more than 30 feet) away from each other.
• Make sure to select the correct user on the monitor before your blood
pressure measurement begins.
• Bluetooth data transmission is not available while taking a measurement.
®
-enabled device. Moving
27

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

897652

Tabla de contenido