MS Turn Serie Manual De Instrucciones página 50

04
(Figure 4.1.9)
4.1.13 Use the five-point seat belt, press the red button to open the five-
point safety button (19), press the central regulator (04) while pulling out the
shoulder strap (05), please do not pull the shoulder pad (06). (Figure 4.1.9).
Make sure that the child's back is flat against the safety seat. First close
the five-point security button two (20), and then insert the lock, the correct
lock will hear the "tick" sound. (Figure 4.1.10) (Figure 4.1.11) (Figure 4.1.12).
Pull the central adjustment belt (21) until the five-point seat belt is close to
the child. (Figure 4.1.13) (Figure 4.1.14)
06
05
(Figure 4.1.12)
In order to ensure the safety of the child, after each installation, please pay
attention to check the matter:
1. Make sure that the two ISOFIX connectors are properly connected to
the vehicle ISOFIX fixed point and that the ISOFIX connection indicator is fully
indicated as green.
2. Make sure that the child's safety seat is tightly attached to the vehicle seat.
3. Make sure that the pull-up belt is tight and the pull-up indicator is green.
4. Make sure that the five-point harness is close to the child, but not the child.
5. Make sure that the adjustment of the shoulder strap is correct and not distorted.
6. Make sure that the height of the shoulder pad is the same as the height
of the child's shoulder.
7. Make sure that the five-point snap is locked.
50
06
05
19
20
(Figure 4.1.10)
(Figure 4.1.13)
19
(Figure 4.1.11)
21
(Figure 4.1.14)
06