MS Turn Serie Manual De Instrucciones página 53

06
05
(Figure 5.1.10)
In order to ensure the safety of the child, after each installation, please pay
attention to check the matter:
1. Make sure that the two ISOFIX connectors are properly connected to
the vehicle ISOFIX fixed point and that the ISOFIX connection indicator is fully
indicated as green.
2. Make sure that the child's safety seat is tightly attached to the vehicle
seat.
3. Make sure that the pull-up belt is tight and the pull-up indicator is green.
4. Make sure that the five-point harness is close to the child, but not the
child.
5. Make sure that the adjustment of the shoulder strap is correct and not
distorted.
6. Make sure that the height of the shoulder pad is the same as the height
of the child's shoulder.
7. Make sure that the five-point snap is locked.
21
(Figure 5.1.11)
06
(Figure 5.1.12)
53