MS Turn Serie Manual De Instrucciones página 56

(Figure 5.2.4)
25
26
(Figure 5.2.5)
latch (24) under the child's arm and in the guide groove (27) with the red
mark. (Figure 5.2.5)
56
5.2.9 Make sure that the safety seat of the
five-point harness is properly disassembled.
(Refer to section 7)
5.2.10 Please refer to section 3.3 to adjust
the good head (08).
5.2.11 Please refer to section 3.4 to adjust
24
the chair (12) and confirm that it is locked (not
slidable).
5.2.12 Please refer to section 3.5 to adjust
the chair (12) and confirm that it is locked (not
rotating).
5.2.13 Place the child's safety seat in the
same direction as the vehicle in the vehicle seat
and allow the child to sit on the safety seat.
27
5.2.14 Pull out the vehicle seat belt around
the child and insert the car harness insert into
the latch (24) and "tick" when locked (Figure
5.2.4)
WARNING: Make sure that the vehicle har-
ness is not distorted.
5.2.15 Place the vehicle belt belt (25) and
the belly (26) on the side of the car seat belt