Removing The Cover - ISOFIX RÜCKKO plus Manual De Uso

2. Line up the green points of the seat with the green points of the isofix base and install
the seat on the anchoring points
3. Pull the seat recline lever
you will be able to select positions 2 or 3 when your child is travelling asleep.
4. Press the red button "press"
the button "push" outward to close and lock the anchoring points. The red button
"press" will remain protruding, displaying the green "lock" indicator, which indicates
that the anchoring points are securely fastened (fig. 7.4).
8. UNINSTALLING THE CHILD SEAT
1. Press the red button "press"
letting go, press the button "push" inward to open and unlock the anchoring points.
The red button "press" will remain inside the frame. The green "lock" indicator will
remain hidden, indicating that the anchoring points are open (fig. 8.1).
2. Press and draw back the isofix system unlocking button
arms. The button will go from partially green to completely red, indicating that it is
open (fig. 8.3).
3. Partially pull out the base and fold up the support leg. Press the adjuster button
as you pull up the leg with your other hand (fig. 8.5 and 8.6).
4. Fold up the leg (fig. 8.7).
5. Drawing towards you, pull in the two isofix arms (fig. 8.8).
6. Press the button
use (fig. 8.9).

9. REMOVING THE COVER

1. Remove the reducer mattress pad.
2. Carefully remove the fabric cover from the headrest.
3. Unfasten the Velcro straps from the textile part of the back.
4. Unfasten the two hooks at the rear, which attach the fabric cover to the plastic seat base.
30
(W)
(K) to adjust the seat to recline position 1 (fig. 7.2). Later,
(V)
situated on the front of the base, which will push
(V) situated on the front of the base, and, without
(N) to release the rebound bar. Remove it and store it for future
facing towards the direction of travel (fig.7.1).
(P)
to unlatch the isofix
(R)