Cleaning And Maintenance - Tribest Dynapro DPS-1050 Manual De Uso

CLEANING AND MAINTENANCE

Main body
1. Unplug the power cord.
2. Wash the outside surface with a damp, soft cloth or sponge that has been rinsed in a mild
solution of liquid detergent and warm water. Do not place the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so they work freely. They may become sticky from use. Moisten a
cotton swab with a household degreaser or cleaner and clean the grooves around the switches.
Immediately dry all surfaces.
5. Polish with a soft cloth.
Container
1. Fill the container half full with warm water and add a couple drops of liquid dish washing
detergent to the container.
2. Snap or push the lid into the locked position.
3. Perform one of the following procedures:
Manual Speed:
a. Rotate the Variable Speed dial to Min.
b. Press the Start/Pause knob.
c. Slowly increase Variable Speed to Max.
d. Run the machine for 30 to 60 seconds.
• NEVER allow water to enter the main body of the machine.
• NEVER use harsh chemicals, such as bleach, to remove food stains from the blender.
• NEVER drop any of the components, particularly the auger. Our warranty does not cover
accidental damage.
All parts, except the Safety Hood are dishwasher safe.
14