Sedus se:line Instrucciones De Uso página 7

Healthy sitting is a question of attitude / Tips for users
Use the whole seat surface
The anatomically shaped seat should
be fully occupied. Only then is
proper contact with the supporting
back rest assured.
Adjust the height of the seat
precisely
The correct seat height means that
the elbow joint adopts an angle of
about 90° when the forearms are
resting horizontally on the desktop.
Correct use
This swivel chair is designed for
a user weight of up to 110 kg and
may only be used for the purpose
intended while exercising due
care and attention. Using it
inappropriately (e.g. as a step-
ladder, sitting on the armrests or
placing extreme weight on one
side) could result in accidents.
Castors
Please remove the red or blue
transport protection before using
the product for the first time.
A variety of castors are available,
for the sake of your safety and for
use on different types of flooring in
accordance with safety regulations:
– Hard castors for soft flooring
The knee joint will also adopt an
angle of about 90° when the feet
are flat on the floor. If your desktop
is too high, and cannot be lowered
to a correct position, you need
a footrest with adjustable height
and tilt.
– Soft castors for hard floors
Changing castors: this might be
necessary, for instance, after
moving office, or after the instal-
lation of a new floor covering –
simply pull out the castors and
push new ones in.
Plastic parts
Soapy water is suitable for cleaning.
Please do not use any aggressive
cleaning materials.
Leather
Leather is a natural product. The
natural markings of the animal skin
gives the material its unmistakable
texture. Rub off light soiling with a
soft woollen cloth. Heavier soiling
should only be treated with cleaners
Dynamic sitting
Dynamic sitting means changing
your sitting posture frequently, or
in other words shifting as often as
possible between the front and
rear sitting posture. You should
therefore adjust the backrest
dynamically. This ensures that the
backrest and seat automatically
give your body support in every
sitting/lying position.
designed for aniline-dyed leather.
Do not expose semi-aniline leather
to direct sunshine.
Servicing
The seat and backrest can only be
replaced in the factory.
Servicing work, such as exchan-
ging or working on the pneumatic
springs, may only be carried out
by trained personnel.
7