Sedus silent rush modern classic Instrucciones De Uso página 7

Healthy sitting is a question of attitude / Tips for users
Use the whole seat surface
The anatomically shaped seat should
be fully occupied. Only then is
proper contact with the supporting
back rest assured.
Adjust the height of the seat
precisely
The correct seat height means that
the elbow joint adopts an angle of
about 90° when the forearms are
resting horizontally on the desktop.
Correct use
This office swivel chair is designed
for a user weight of up to 120 kg
and may only be used for the
purpose intended while exercising
due care and attention. Using it
inappropriately (e.g. as a step-
ladder, sitting on the armrests or
placing extreme weight on one side)
could result in accidents.
Castors
Please remove the red or blue trans-
port protection before using the
product for the first time.
A variety of castors are available,
for the sake of your safety and for
use on different types of flooring in
accordance with safety regulations:
The knee joint will also adopt an
angle of about 90° when the feet
are flat on the floor. If your desktop
is too high, and cannot be lowered
to a correct position, you need
a footrest with adjustable height
and tilt.
Dynamic sitting
Dynamic sitting means changing
your sitting posture frequently, or
in other words shifting as often as
– Hard castors for soft flooring
(standard)
– Soft castors for hard floors are
optional
Changing castors: this might be
necessary, for instance, after
moving office, or after the instal-
lation of a new floor covering –
simply pull out the castors and
push new ones in.
Plastic parts
Soapy water is suitable for cleaning.
Please do not use any aggressive
cleaning materials.
Leather
Leather is a natural product. The
natural markings of the animal skin
gives the material its unmistakable
possible between the front and
rear sitting posture.
You should therefore adjust the
backrest dynamically. "silent rush"
is equipped with a "Similar"
mechanism, allowing you to adjust
the backrest pressure as best suits
you. This ensures that the backrest
and seat automatically give your
body support in every sitting/lying
position.
texture. Rub off light soiling with a
soft woollen cloth. Heavier soiling
should only be treated with cleaners
designed for aniline-dyed leather.
Do not expose semi-aniline leather
to direct sunshine.
Arm-rest pads
If required, the arm-rest pads can
be replaced by our Customer Service
department.
Servicing
The seat and backrest can only be
replaced in the factory.
Servicing work, such as exchan-
ging or working on the pneumatic
springs, may only be carried out
by trained personnel.
7