Handling And Transport; Assistance And Repairs; Warranty Coverage; Maintenance Table - Alpina ABL 40 Li Manual De Instrucciones

NOTE If unused for any length of
time, recharge the battery every two
months to prolong its working life.

9. HANDLING AND TRANSPORT

Whenever the machine is to be
handled or transported you must:
– Stop the machine (para. 6.5);
– remove the battery from its housing
and recharge it (para. 7.2.2);
– Only take hold the machine using the
handgrips and position the pipes so
that they do not case obstruction.
When transporting the machine
on a vehicle, always:
– remove the tubes;
– position it so that it does not
cause a hazard to anyone.

10. ASSISTANCE AND REPAIRS

This manual provides all the necessary
information to run the machine and for correct
basic maintenance operations which can
be performed by the user. Any regulations
and maintenance operations not described
herein must be carried out by your Dealer
or Authorised Service Centre, which have
the necessary knowledge and equipment to
ensure that the work is carried out correctly,
maintaining the correct degree of safety and the
original operating conditions of the machine.
Any operations performed in unauthorised
centres or by unqualified persons will totally
invalidate the Warranty and all obligations
and responsibilities of the Manufacturer.

12. MAINTENANCE TABLE

Intervention
MACHINE
Check all fasteners
Safety checks/check controls
Check the battery charge status
Recharge the battery
Cleaning the machine
Checking for any damage to the machine. If
necessary, contact the authorised service centre.
* Refer to the battery/battery charger manual.
• Only Authorised Service Centres can carry
out guaranteed repairs and maintenance.
• The Authorised Service Centres only
use genuine spare parts. Genuine
spare parts and attachments have been
designed specifically for machines.
• Genuine spare parts and attachments have
been designed specifically for machines.
• Non-original parts and attachments are
not approved; use of non-original spare
parts and attachments will jeopardise
the safety of the machine and relieve the
Manufacturer from all obligations or liabilities.

11. WARRANTY COVERAGE

The warranty covers all material and
manufacturing defects. The user must
follow all the instructions provided in
the accompanying documentation.
The warranty does not cover damage caused by:
• Failure to become familiar with the
documentation accompanying the machine.
• Carelessness.
• Incorrect or prohibited use or assembly.
• Use of non-genuine spare parts.
• Use of attachments not supplied or
not approved by the manufacturer.
The warranty does not cover:
• Normal wear and tear of
consumable materials;
• Normal wear and tear.
The purchaser is protected by his or her own
national legislation. The purchaser's rights under
the national laws or his or her own country are
not in any way restricted by this warranty.
Frequency
Before each use
Before each use
Before each use
After each use
After each use
After each use
EN - 12
Notes
para. 7.4
para. 6.2
*
para. 7.2.2
*
para. 7.3
-