Trotec BX11 Manual De Instrucciones página 11

Power supply/Settings
The symbol which indicates that the battery power is low should disap-
pear after the batteries have been inserted . The batteries are powerful
enough to operate the LCD display and allow time and tariff settings
to be carried out . The condensers are charged as soon as the energy
is connected to a mains supply . The device then runs on alternating
current instead of batteries . Change the batteries as soon as the "Low
Bat" symbol appears on the display . See below to find more informa-
tion on how to carry out time and tariff settings .
A. Time and day settings
1 . Press the "SET" key and hold for 3 seconds to access the system
menu . Press again to set the day of the week .
2 . Press the "s"-key to change the value which is currently blinking on
the display from MON to SON .
3 . Press the "SET" key to set the time .
4 . Press the "s"-key to change the value which is currently blinking on
the display . The number shown increases when the key is held .
5 . Press the "SET" key again to save the setting . Repeat the procedure
if you wish to change any of the settings .
6 . When you have entered the time, press the "s"-key again to enter
the individual tariffs .
EN
B. How to carry out settings for energy tariffs and times
1 . Press the "SET" key to get to "Tin" (time in) in order to enter the time
when the tariff starts .
2 . Press the "s"-key to change the value which is currently blinking on
the display . The number shown increases when the key is held .
3 . Press the "SET" key to get to the next item .
4 . Press the "SET" key again after you have entered the starting time
(Tin) to enter the time when the special tariff ends (Tout = time out) .
5 . Press the "SET" key again to save the setting . Repeat the procedure if
you wish to change any of the settings .
6 . When you have entered the times for the individual tariffs, press the
"s"-key again to enter the cost tariffs .
C.Tariff cost settings
1 . You may enter the costs for a standard tariff as well as a special tariff
(the unit shown is in euro cents e .g . 10 cents) . Tariff 1 is for the
normal tariff and Tariff 2 for the energy costs in the special tariff .
2 . Press the "SET" key to get to the tariff menu .
3 . Press the "s"key to change the value which is currently blinking on
the display . The number shown increases when the key is held .
4 . Press the "SET" key to get to the next item .
Operating manual – Energy cost measuring instrument B - 4