Intended Use - Trotec BX11 Manual De Instrucciones

• It must be ensured that trained and instructed personnel monitor and
ensure the correct use of the device when used in schools, training
facilities, hobby and self-help workshops .
• Do not leave any packing material lying around . All packaging mate-
rial must be disposed of immediately as it can pose a serious health
hazard to children .
• If there is evidence which suggests that the device cannot be used safely,
then the device must be switched off immediately and measures must
be taken to ensure that the device is not used again accidentally . It can
be assumed that the device cannot be used safely if the device no longer
works or displays visible signs that damage has occurred during storage
in unfavourable conditions or over a longer period or when it appears to
have been it subjected to stress and strain during transport .
• Do not stick any pins, pieces of metal or any other objects into the device .

INtENdEd USE

The energy meter has a range of 2 to max . 3680 W . Accurate meas-
urements are not possible below or above these thresholds . Measure-
ments carried out outside these limits can lead to an overload and
cause irreparable damage to the device .
EN
The BX11 has been designed and developed for the monitoring and meas-
uring of electrical consumers . Although it is able to deliver highly accurate
information, it is not officially registered as a means for the settlement
of electricity costs between power supply companies and consumers .
- The BX11 is only approved for use with 230 V AC .
- Do only connect electrical consumers with a 230 V AC 50/60 Hz
power supply .
- The max . power input of all the connected consumers must not exceed
3680 watts (3000 watts type E max . power 16 A) .
- The energy meter may only be used in closed rooms and in dry
environments . Outdoor use is strictly prohibited!
- Be sure to observe the information on the type plate of the connected
load at all times .
- For reasons of safety, only ever plug the BX11 directly into a suitable
mains power socket and never use an extension cable to connect it
to the power supply!
- If the energy meter is used for any purpose other than the purpose
for which it was originally intended, then this will invariably result
in damage to the product . Such misuse can furthermore present a
serious threat of danger, e . g . a short circuit, fire, electric shock .
The entire product may not be changed or modified in any way . The
safety instructions are to be followed and must be complied with
at all times .
Operating manual – Energy cost measuring instrument B - 2