Working Mode - InMotion SCV R1EX Serie Manual De Usuario

2.7.2.
Sound Prompt
The built-in speaker on the INMOTION SCV will make different sounds to indicate running state and working mode. The Sound
Prompt is on by default. You can turn off the tone or customize the sounds using the INMOTION Smartphone App. See Section 2.12,
Smart phone App, for more information.

2.8. Working Mode

2.8.1.
Introduction
Important Working Modes:
Working Mode
Standby
Balance
Auto Balance
Excessive Angle
Self-check
The INMOTION SCV is in Standby Mode by default. Most of the other modes will be started from
Standby Mode.
Indicates the INMOTION SCV has detected a rider and the footboard angle is moderate. Training Mode
and Speed Mode can be activated from Balance Mode. Read Section 3 for more information.
When a rider steps onto the INMOTION SCV and the footboard angle is moderate (between 2° and
15°), the system will start to level the footboard. In the meantime, the INMOTION SCV may travel a
short distance either backward or forward in order to balance itself. An excessive or too small angle will
trigger an error warning.
When a rider steps onto the INMOTION SCV and the footboard angle is too big, the INMOTION SCV
will vibrate to warn the rider to slowly level the footboard.
The INMOTION SCV will examine and calibrate itself in Self-check Mode. Read Section 3.6 for more
information.
Description
90