InMotion SCV R1EX Serie Manual De Usuario página 93

2.9. The Front/Tail Light
The Front Light of the INMOTION SCV is a pair of blue LED lights, and the Tail Light is a pair of red LED lights. They
flash in different modes according to your operation. The following chart shows different modes of the Front and Tail Light:
Operation
Power On The Front Light and the Tail Light illuminate for 1 second
Switch On The Front Light and the Tail Light flash
The Front Light and the Tail Light flash for 0.5 second every 3 seconds
Standby
Error The Front Light and the Tail Light illuminate at the frequency of 1 Hz
Balancing The Tail Light illuminates at half brightness
Slowing down The Tail Light illuminates for 1 second, and then illuminates at half brightness
The Tail Light of the turning direction illuminates, and the Front Light flashes from both sides to the
Turning
middle.
The brightness of the lights on the INMOTION SCV is not sufficient to guide you when it is dark outside. In case of low light
please ride slowly and be cautious, and use an external light source.
Turn the Front Light on or off by pressing the Shift Button (C) under Shift Mode, and turn off the Front Light and the Tail Light
completely using the Smartphone App.
The Rider Detect Sensors detect the presence or absence of a rider while the INMOTION SCV is powered on. The Rider Detect
Sensors work like a scale. They can detect the rider if he or she is standing with one foot on or both feet on.
Description
93