MWE6004
!
WARNING!
•
Secure the parts of the parking aid which are installed in the vehicle in
such a way that they cannot become loose under any circumstances
(sudden braking, accidents) and cause injuries to the occupants of
the vehicle.
•
Do not install the parts of the parking aid anywhere in the vehicle
where an airbag may open. This could cause injury if the airbag
deploys.
•
The parking aid is intended as an additional aid, which means it does
not relieve you of the obligation to take due care when manoeuvring.
A
NOTICE!
•
Installing the parking aid can cause problems on vehicles with LED tail
lights.
•
If you would like to install the sensors on metal bumpers, we advise
you to use the adapter (ref. no. 9101500015, not included in the
scope of delivery).
•
Do not expose the control electronics to dampness.
•
Do not install the control electronics near any other control modules.
•
The sensors may not cover signal lamps.
•
When fitting the sensors, make sure there are no objects fixed to the
vehicle that are in the detection range of the sensors.
EN
Safety and installation instructions
5