Setting The System - Dometic MAGICWATCH MWE 6004 Instrucciones De Montaje

MWE6004
10

Setting the system

See fig. d to fig. g
!
WARNING!
Incorrect settings can impair the operational safety.
The device has the following control elements:
No. in fig. e
1
2, 3
Supplementary to fig. g
Configurable parameters:
•
No. 01: Speaker volume
•
No. 03: Detection range for centre sensors
•
No. 05: Detection range for outer sensors
•
No. 07: Stop zone
•
No. 09: Acoustic signal for obstacles
•
No. 11: Mirror sensors
•
No. 12: Colour of background lighting
•
No. 13: Suppression of objects permanently mounted to vehicle
(e.g. trailer hitch)
•
No. 17: Sensor sensitivity
I
NOTE
•
To save the settings, disengage and engage the reverse gear and
wait for 2 s.
•
To stop setting the parameters without saving your changes, or
to stop the entire set-up: Do not press any button for a while.
Restoring the factory settings
➤ Press both buttons below the display until the reset is acknowledged with a brief
sound.
EN
Description
F SET
LC display
Buttons for setting the system
Factory settings activated
Setting the system
11