Fitting The Parking Aid - Dometic MAGICWATCH MWE 6004 Instrucciones De Montaje

Fitting the parking aid

7 Fitting the parking aid
See fig. 6 to fig. a
Supplementary to fig. 7
A
NOTICE! Risk of malfunction!
Align the sensor holders so that the fastening lugs are horizontal. Other-
wise there is no guarantee the parking aid will function correctly.
➤ Push the sensor holders into the holes until they lock into place.
Supplementary to fig. 8
I
NOTE
The manufacturer recommends applying some grease to the sensor
plug connections (not on the control module).
Supplementary to fig. 0
A
NOTICE! Risk of malfunction!
Align the monitor bracket so that the driver can look vertically at the
monitor or down onto it at a 45° angle. Otherwise the monitor contrast
will be poor.
➤ Mount the monitor bracket at one of the positions shown here.
8
MWE6004
EN