Setup Options - Festool SYSROCK BR 10 DAB+ Manual De Instrucciones

Ocultar thumbs Ver también para SYSROCK BR 10 DAB+:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
English
charge the smartphone or similar devi­
ces when the radio is in power on mode
and in DAB/FM radio mode, Bluetooth
mode or AUX mode.
► Connect your smartphone to the
USB charging socket [1-4] on the
top of your radio.
► Your smartphone will begin to
charge.
► Once your smartphone has fully
charged remove the USB cable.
NOTE: Charging mobile phones
(for example) or other devices
may affect the listening quality
while listening to the DAB/FM
stations.
CAUTION
The charger may not supply power
to some USB devices.
When not using or after charging,
remove the USB cable.
Do not connect power source to USB
port. Otherwise there is a risk of
fire. The USB port is only intended
for charging lower voltage device.
Do not insert a nail, wire, etc. into
the USB power supply port. Other­
wise a circuit short may cause
smoke and fire.
Do not connect this USB socket with
your PC USB port, as it is highly
possible that it may cause break­
down of the units.
Never use the USB socket in rainy
or moist conditions to prevent mois­
ture from entering the radio.
Close the USB socket after use with
the protective cap to prevent con­
tamination.
24

5.13 Setup options

Attachment handle [1-1]
®
The folding attachment handle allows
you to hang the device from scaffolding
or similar structures.
If you decide to power the device
with an external Festool battery
pack, the attachment handle
must be detached before­
hand [2A].
Tripod
A standard photographic tripod with
UNC 1/4"-20 thread can be attached to
the threaded tripod socket [2-1].
6
Service and maintenance
www.festool.com/service
EKAT
4
5
3
2
1
Always clean the display [1-9] and
speaker grill [1-7] on the SysRock
using a soft, dry cloth to prevent any
damage. Do not use solvents.
Keep the contacts on the SysRock
and battery pack clean.
Customer service
and repairs must
only be carried out
by the manufacturer
or service work­
shops. Find the
nearest address at:
Always use original
Festool spare parts.
Order no. at:
www.festool.com/
service

Publicidad

Tabla de contenido
loading

Tabla de contenido